Home  /   Shotshell Reloading  /  Hulls  /  New Hulls By Gauge  /  16 Gauge Hulls

Cheddite 16ga 2.75" 16mm Primed Hull (100/bag)


Cheddite 16ga 2.75

Item Number: 1391670
 Review Average:  
 Number of Reviews: 3
 View Reviews | Review this item

Will be shipped via: STANDARD GROUND
Size/Color
Quantity 


 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov

Detailed Description

Cheddite 16ga 2.75" 16mm New Primed Hull (100/bag)
 
Specifications:
  • Gauge: 16
  • Material: Plastic Tube
  • Primer: Cheddite-209 (CX2000)
  • Color: Blue, Green
  • Length: 2.724 inches
  • Brass Height: 16 millimeters
  • Depth: 2.454 inches
  • Wall Thickness: 0.027 inches
  • Top Edge: Skived
  • Headstamp: "16" and stars
  • Quantity: 100 hulls
  • Load Data: Sixteen Gauge Manual, Advantages Manual

 

Description:

If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).

Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.

Comparison Chart: 16ga 2.75" hulls
Part # Mfg. Gauge Length Specs Primer Depth
#RIO167016 Rio 16ga 2.743 red/unskived 16mm Rio 209 2.481
#1391670 Cheddite 16ga 2.724 blue/skived 16mm Ched-209 2.454
#1391671 Cheddite 16ga 2.724 red/skived 8mm Ched-209 2.454
#0641667 Fiocchi 16ga 2.725 blue/skived 16mm Fiocchi 616 2.417
#064166708 Fiocchi 16ga 2.725 red/skived 8mm Fiocchi 616 2.417
*Select an alternative if your first choice is out of stock.

 

Restrictions:

Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Made in France



 Product ReviewsClick here to review this item
Great hull for loading TSS for turkey loads!!! 11/16/2018
I use these hulls to load #9 TSS shot for my Remington 870 Express, and Savage 220A 16ga guns! They make a perfect roll crimp if I do my part! Great hull!
- 2Shooter, GA
 
Look and perform like factory loads..or better 11/2/2018
I have loaded 200 of these using the star crown crimp starter on my MEC 600 Jr. and they look as good as factory loads and shoot great.
- Jon, TX
 
Nice Crimp 12/14/2015
Ive only loaded a dozen or so so far of these but compared to the once fired Federal purple and Remington black hulls- these have crimped perfect every time! saves a little time too in that they are primed and NO hazmat fee to ship!
- Brett Shelagowski, MT
 

You May Also Like