|
TPS .410 Bore Non-Toxic Preslit Wad (5,000/case)
The world's first and only non-toxic .410 wad
Specifications:
- Size: .410 Bore
- Length: 1.995"
- Depth: 1.900"
- Gas Seal Diameter: 0.407"
- Gas Seal Depth: 0.051"
- Wall Thickness: 0.025" to 0.050"
- Slits: Four slits
- Cup Capacity for SpheroTungsten 18.0 #9: 353 gr. (13/16 oz.)
- Cup Capacity for SpheroTungsten 18.0 #9 (with FC310 in base of wad): 301 gr. (11/16 oz.)
- Cup Capacity for SpheroTungsten 15.0 #7: 279 gr. (5/8 oz.)
- Load Data: Status of Steel , Small Bore Manual , and - CLICK: SpheroTungsten .410 load data -
- Product Type: Wad, Multi-Metal capability
- Typical Loads: High-capacity field loads
Maximum capacities of smaller shot sizes are 9/16 oz. and 3/8 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
SpheroTungsten shot: The introduction of SpheroTungsten 15.0 and 18.0 has radically changed the capabilities of .410 shotshells:
Description:
The TPS .410 is a full-length shot column wad designed specifically for the rigors of modern non-toxic shot, like steel and tungsten shot. This is the only wad that will allow you to load almost any type of non-toxic shot for your modern .410 shotgun. Designed for magnum field loads, the TPS .410 is the grand result of over two years of development.
MYLAR: Steel and tungsten shotshell pellets are as hard or harder than a shotgun's bore and barrels. Because these pellets are very hard, they are abrasive and can cause barrel damage if the shot protrudes through the wad slit or otherwise comes into direct contact with bore/barrel. NO wad or component can alter the reality of physics. Hard shotshell pellets can cause damage. As an insurance policy to reduce the chances of barrel damage due to abrasive pellets, Mylar Wraps are always very good idea. They may be added to any of the loads for the TPS 410.
Made in USA
NOTE: No wad can completely eliminate the risk of scoring or abrasion. Pellet materials harder than your gun's barrel can still cause damage. However, the TPS .410 wad is molded in tough high density material and will provide maximum protection. Follow only tested and published load data. READ A LOADING MANUAL BEFORE YOU START TO LOAD.
| 
