|
|||||||
Home | |||||||
LOAD OF THE WEEK
Fiocchi 28ga 3”
“Cognitive dissonance” describes the mental discomfort that
results from holding two conflicting beliefs, values, or
attitudes. People tend to seek consistency in their attitudes
and perceptions, so this conflict causes feelings of unease or
discomfort, like when we read “28-gauge” and “three inch” in the
description of a cartridge. As a ballistician and a shotgunner
(who is fond of small bores), I’m still getting used to it.
We should remember that life is still full of mystery and
surprises – and this is one that we should explore. Ours is a
scientific inquiry, so we won’t simply dismiss the 28ga 3” as a
novelty. We will pursue it and see what it has to offer us as
shotgunners.
These are the early stages of our development. We are
currently pursuing loads with lead, steel, bismuth, and
SpheroTungsten 18.0 shot. That is just for starters. We are
breaking new ground….
(*This should go without saying, but these loads are ONLY for
28ga shotguns designed and chambered for 3” cartridges. If you
are at all in doubt, contact the manufacturer of your shotgun or
a reliable gunsmith.)
HULL: Fiocchi
28-ga 3”
PRIMER: Fiocchi 616 standard
PROPELLANT:
Hodgdon Lil Gun® 26.1 grains
WAD: HV28 Magnum 28
SHOT: 1-ounce lead
shot (#6 nickel-plated lead used in tests, 438 grains)
ROLL CRIMP: w/OS28
or N728 overshot
Results: 1210 FPS
9148 PSI
STEEL SHOT: Load#11059
HULL: Fiocchi
28-ga 3”
PRIMER: Fiocchi 616 standard
PROPELLANT:
Hodgdon Lil Gun® 26.2 grains
WAD: TPS 28 wad with Thin Mylar interior wrap
SHOT: ¾-ounce
steel shot (#6 steel used in tests, 328 grains)
ROLL CRIMP: w/OS28
or N728 overshot
Results: 1355 FPS 11,950
PSI
Happy hunting & safe
shooting,
Curmudgeon, Jr.
WARNING: Where data contained here, on labels and in catalogs and booklets list
specific components, no changes or substitutions for these
components can be made, except substitutions of shot sizes that
will equate to the same weight charge listed, without risking
significant changes in the level of ballistic performance and/or
safety of the loads shown. Follow loading data exactly and do
not substitute components. We make no warranties express or
implied, limited or full. Failure to comply with these and other
standards of reloading may result in accidents with serious
injury and/or death to the shooter and/or bystanders.
© 2018 Ballistic Products, Inc. All Rights Reserved
© 2020 Ballistic
Products, Inc.
WARNING: BALLISTIC PRODUCTS, INC. DISCLAIMS ALL POSSIBLE LIABILITY FOR DAMAGES, INCLUDING ACTUAL, INCIDENTAL, AND CONSEQUENTIAL, RESULTING FROM USAGE OF INFORMATION OR ADVICE CONTAINED IN THIS AND OTHER PUBLICATIONS, LABELS, CATALOGS, TESTING REPORTS AND BOOKLETS. USE DATA AND ADVICE AT YOUR OWN RISK AND WITH CAUTION. WHERE DATA LIST SPECIFIC COMPONENTS, NO CHANGES OR SUBSTITUTIONS FOR THESE COMPONENTS CAN BE MADE WITHOUT RISKING SIGNIFICANT CHANGES IN THE LEVEL OF BALLISTIC PERFORMANCE AND/OR SAFETY OF THE LOADS SHOWN. FOLLOW LOADING DATA EXACTLY AND DO NOT SUBSTITUTE COMPONENTS. WE MAKE NO WARRANTIES EXPRESS OR IMPLIED, LIMITED OR FULL, AND WE DISCLAIM ANY SUCH WARRANTIES. FAILURE TO COMPLY WITH THESE AND OTHER STANDARDS OF RELOADING MAY RESULT IN ACCIDENTS WITH SERIOUS INJURY AND/OR DEATH TO THE SHOOTER AND/OR BYSTANDERS. KEEP OUT OF REACH OF CHILDREN. WE DISCLAIM ANY AND ALL LIABILITY FOR DAMAGE OR INJURY THAT MAY RESULT FROM YOUR HANDLOADED SHOTSHELLS AS WE HAVE NO CONTROL OVER ANY OF THE NUMEROUS POSSIBLE VARIATIONS IN COMPONENT PRODUCTION LOTS, IN TOOL AND DIE DIMENSIONS, IN YOUR LOADING PRACTICES AND PROCEDURES. THE INDIVIDUAL RELOADER IS SOLELY RESPONSIBLE FOR ANY VARIATION THAT MAY BE INCURRED BY ASSEMBLED AMMUNITION. TO AVOID SERIOUS INJURY OR DEATH TO SHOOTER AND BYSTANDERS, THIS PRODUCT SHOULD ONLY BE USED IN GUNSMITH-INSPECTED GUNS DESIGNED FOR MODERN SHOTSHELLS. IF GUN FAILS TO FIRE, KEEP POINTED IN SAFE DIRECTION FOR 30 SECONDS, THEN UNLOAD CAREFULLY. WEAR EYE AND EAR PROTECTION AND OBSERVE PROPER GUN SAFETY AT ALL TIMES. ALL PRODUCTS SOLD “AS IS”. |
|||||||
![]() |
Your access to
this web site signifies your understanding of, consent to, and agreement
with the terms and restrictions outlined on the
legal
page.