BPI Curmudgeon Logo
Do you have a load request you'd like to see?

 Email it to:
loadoftheweek@ballisticproducts.com
 
Shop
   Home 

LOAD OF THE WEEK

 

20ga 3” Tungsten 18.0

 

This heavy hitting 20ga 3” load is a hint of things to come. BPI will soon be receiving a shipment of Tungsten shot in 18.0 density in a range of shot sizes from #5 to #10.

 

Load #10968

HULL:  Federal 20ga 3”

PRIMER: Federal 209A

PROPELLANT:  Hodgdon Lil Gun® 29.1 grains

WAD: OB20 gas seal under TPS20 wad (slit 4x)
            (2) Cork 28ga 1/8” in base of shotcup

SHOT:  1- 5/8-oz (711 grains) Tungsten 18.0 density #9

CRIMP:  Fold w/OS20

Results: 1080 FPS  10970 PSI

 

Happy hunting & safe shooting,


-Curmudgeon Jr. 

 

WARNING: Where data contained here, on labels and in catalogs and booklets list specific components, no changes or substitutions for these components can be made, except substitutions of shot sizes that will equate to the same weight charge listed, without risking significant changes in the level of ballistic performance and/or safety of the loads shown. Follow loading data exactly and do not substitute components. We make no warranties express or implied, limited or full. Failure to comply with these and other standards of reloading may result in accidents with serious injury and/or death to the shooter and/or bystanders.   © 2018 Ballistic Products, Inc. All Rights Reserved

 

                         

© 2020 Ballistic Products, Inc.   

WARNING: BALLISTIC PRODUCTS, INC. DISCLAIMS ALL POSSIBLE LIABILITY FOR DAMAGES, INCLUDING ACTUAL, INCIDENTAL, AND CONSEQUENTIAL, RESULTING FROM USAGE OF INFORMATION OR ADVICE CONTAINED IN THIS AND OTHER PUBLICATIONS, LABELS, CATALOGS, TESTING REPORTS AND BOOKLETS.  USE DATA AND ADVICE AT YOUR OWN RISK AND WITH CAUTION. WHERE DATA LIST SPECIFIC COMPONENTS, NO CHANGES OR SUBSTITUTIONS FOR THESE COMPONENTS CAN BE MADE WITHOUT RISKING SIGNIFICANT CHANGES IN THE LEVEL OF BALLISTIC PERFORMANCE AND/OR SAFETY OF THE LOADS SHOWN.  FOLLOW LOADING DATA EXACTLY AND DO NOT SUBSTITUTE COMPONENTS. WE MAKE NO WARRANTIES EXPRESS OR IMPLIED, LIMITED OR FULL, AND WE DISCLAIM ANY SUCH WARRANTIES. FAILURE TO COMPLY WITH THESE AND OTHER STANDARDS OF RELOADING MAY RESULT IN ACCIDENTS WITH SERIOUS INJURY AND/OR DEATH TO THE SHOOTER AND/OR BYSTANDERS. KEEP OUT OF REACH OF CHILDREN. WE DISCLAIM ANY AND ALL LIABILITY FOR DAMAGE OR INJURY THAT MAY RESULT FROM YOUR HANDLOADED SHOTSHELLS AS WE HAVE NO CONTROL OVER ANY OF THE NUMEROUS POSSIBLE VARIATIONS IN COMPONENT PRODUCTION LOTS, IN TOOL AND DIE DIMENSIONS, IN YOUR LOADING PRACTICES AND PROCEDURES. THE INDIVIDUAL RELOADER IS SOLELY RESPONSIBLE FOR ANY VARIATION THAT MAY BE INCURRED BY ASSEMBLED AMMUNITION. TO AVOID SERIOUS INJURY OR DEATH TO SHOOTER AND BYSTANDERS, THIS PRODUCT SHOULD ONLY BE USED IN GUNSMITH-INSPECTED GUNS DESIGNED FOR MODERN SHOTSHELLS. IF GUN FAILS TO FIRE, KEEP POINTED IN SAFE DIRECTION FOR 30 SECONDS, THEN UNLOAD CAREFULLY. WEAR EYE AND EAR PROTECTION AND OBSERVE PROPER GUN SAFETY AT ALL TIMES. ALL PRODUCTS SOLD “AS IS”.

Archived Loads


Your access to this web site signifies your understanding of, consent to, and agreement
with the terms and restrictions outlined on the
legal page.