|
|||||||
| Home | |||||||
|
LOAD OF THE WEEK
Valu-Slug 375gr HP Lead Sabot
This heavy-hitting 375-grain bullet is propelled in a four-slit 56-grain sabot (431 grains total, including the sabot). Leon Guthrie requested a Longshot load for this beast. (Specs for this slug are below.)
Load #11188
HULL: Fiocchi
12-ga 2.75”
PRIMER: Fiocchi 616 Standard
PROPELLANT:
Hodgdon Longshot 33.0 grains
WAD: BRP-12 (under sabot/slug)
SLUG: Valu-Slug
375-gr HP Lead Sabot (#R12S375)
ROLL CRIMP: BPI
Exacta-Roll and finished with GAEP #2
Results: 1500 FPS (muzzle)
| 7952 PSI
Happy hunting & safe shooting, -Curmudgeon Jr. 12ga Valu-Slug 375 gr HP Lead Sabot
(100/box)
Our VALU-SLUGS come from a major U.S. cartridge manufacturer. They are
contained and sorted by size through a rigid demilitarization
process. BPI is offering these slugs in box quantities to
maximize savings for our customers.
SPECS:
·
Bullet Dimensions = .50" x .800" (375 grains)
·
Copper-jacketed hollow-point
·
Sabot Dimensions = .734" x 1.066" (56 grains)
·
Total Weight (bullet + sabot) = 431 grains · De-Mil materials: This means that these components have been extracted from manufactured cartridges. The company that performs this action acknowledges that imperfections can and do exist in these components. This is why they are priced very aggressively. If you require perfect components, please look at our specific departments for newly-manufactured components.
WARNING: Where data contained here, on labels and in catalogs and booklets list
specific components, no changes or substitutions for these
components can be made, except substitutions of shot sizes that
will equate to the same weight charge listed, without risking
significant changes in the level of ballistic performance and/or
safety of the loads shown. Follow loading data exactly and do
not substitute components. We make no warranties express or
implied, limited or full. Failure to comply with these and other
standards of reloading may result in accidents with serious
injury and/or death to the shooter and/or bystanders.
© 2018 Ballistic Products, Inc. All Rights Reserved
© 2022 Ballistic
Products, Inc.
WARNING: BALLISTIC PRODUCTS, INC. DISCLAIMS ALL POSSIBLE LIABILITY FOR DAMAGES, INCLUDING ACTUAL, INCIDENTAL, AND CONSEQUENTIAL, RESULTING FROM USAGE OF INFORMATION OR ADVICE CONTAINED IN THIS AND OTHER PUBLICATIONS, LABELS, CATALOGS, TESTING REPORTS AND BOOKLETS. USE DATA AND ADVICE AT YOUR OWN RISK AND WITH CAUTION. WHERE DATA LIST SPECIFIC COMPONENTS, NO CHANGES OR SUBSTITUTIONS FOR THESE COMPONENTS CAN BE MADE WITHOUT RISKING SIGNIFICANT CHANGES IN THE LEVEL OF BALLISTIC PERFORMANCE AND/OR SAFETY OF THE LOADS SHOWN. FOLLOW LOADING DATA EXACTLY AND DO NOT SUBSTITUTE COMPONENTS. WE MAKE NO WARRANTIES EXPRESS OR IMPLIED, LIMITED OR FULL, AND WE DISCLAIM ANY SUCH WARRANTIES. FAILURE TO COMPLY WITH THESE AND OTHER STANDARDS OF RELOADING MAY RESULT IN ACCIDENTS WITH SERIOUS INJURY AND/OR DEATH TO THE SHOOTER AND/OR BYSTANDERS. KEEP OUT OF REACH OF CHILDREN. WE DISCLAIM ANY AND ALL LIABILITY FOR DAMAGE OR INJURY THAT MAY RESULT FROM YOUR HANDLOADED SHOTSHELLS AS WE HAVE NO CONTROL OVER ANY OF THE NUMEROUS POSSIBLE VARIATIONS IN COMPONENT PRODUCTION LOTS, IN TOOL AND DIE DIMENSIONS, IN YOUR LOADING PRACTICES AND PROCEDURES. THE INDIVIDUAL RELOADER IS SOLELY RESPONSIBLE FOR ANY VARIATION THAT MAY BE INCURRED BY ASSEMBLED AMMUNITION. TO AVOID SERIOUS INJURY OR DEATH TO SHOOTER AND BYSTANDERS, THIS PRODUCT SHOULD ONLY BE USED IN GUNSMITH-INSPECTED GUNS DESIGNED FOR MODERN SHOTSHELLS. IF GUN FAILS TO FIRE, KEEP POINTED IN SAFE DIRECTION FOR 30 SECONDS, THEN UNLOAD CAREFULLY. WEAR EYE AND EAR PROTECTION AND OBSERVE PROPER GUN SAFETY AT ALL TIMES. ALL PRODUCTS SOLD “AS IS”. |
|||||||
 |
.jpg)
Your access to
this web site signifies your understanding of, consent to, and agreement
with the terms and restrictions outlined on the
legal
page.