|
|||||||
Home | |||||||
LOAD OF THE WEEK
NEW! BPX Devastator Shot
Non-toxic
tungsten alloy shot with tin plating
Our new BPX Devastator shot is only
available at BPI. In partnership with the world's preeminent
manufacturer of non-toxic shot, we've developed a new type of
shot with a high-density tungsten alloy core and covered in a
protective tin plating. The result is a near perfect sphere of
high density and devastating lethality.
BPX Devastator blends materials in
order to achieve an ideal ballistic balance between enhanced
density, pellet count, spherical precision, and overall
hardness. This unique pellet core consists primarily of
high-density tungsten. It is lethal on turkeys, ducks, geese,
and just about any other game birds. It is manufactured to a
target density of 12.0 grams/cc.
Packaging: BPX Devastator is a premium shot and it is packaged in our
new Sturdy-Pak bottle, which features a convenient pour spout
for easy, spill-resistant loading.
BPX
Devastator is currently available in sizes 1, 4, 5, and 6.
*Shipping:
For insurance purposes, this product cannot ship via USPS.
*USFWS
approved non-toxic
*Pellet
Diameters: #1 = .156
(4.00 mm), #4 = .128 (3.25 mm), #5 = .118 (3.00 mm), #6 = .109
(2.75 mm)
NOTE: The shot size listed is indicative of the filler wad
required for that particular shot size. Your filler wad may vary
according to the shot size used. Load#10931
HULL: Fiocchi
12-ga 3”
PRIMER: Fiocchi 616 MAGNUM (This is now standard in new
production Fiocchi 3” and 3.5” hulls)
PROPELLANT:
Hodgdon Longshot 27.5 grains
WAD: BP12 (slit 4X) + FS12 cushioned gas seal, Cork 20ga ¼” in
base of wad
SHOT AMT: 1-1/4
ounce (547 gr.)
SHOT TYPE: BPX Devastator Plated Tungsten Shot 12 grams/cc
(#2)
BUFFER: none
FOLD CRIMP:
6-point w/OS12 overshot
Results: 1250 FPS
8850 PSI Load#10943
HULL: Fiocchi
12-ga 2-3/4”
PRIMER: Fiocchi 616 standard
PROPELLANT:
Hodgdon Longshot 28.5 grains
WAD: MG42 wad, Felt 20ga ¼” in base of wad
SHOT AMT: 1-1/4
ounce (547 gr.)
SHOT TYPE: BPX Devastator Plated Tungsten Shot 12 grams/cc
BUFFER: Original Buffer, 15 grns
FOLD CRIMP:
6-point w/OS12 overshot
Results: 1280 FPS
9568 PSI Load#10935
HULL: Federal IBW
12-ga 2-3/4”
PRIMER: Federal 209A
PROPELLANT:
Hodgdon Longshot 29.0 grains
WAD: Cushioned LBC wad, Cork 20ga ¼” in base of wad
SHOT AMT: 1-1/8
ounce (492 gr.)
SHOT TYPE: BPX Devastator Plated Tungsten Shot 12 grams/cc
BUFFER: none
FOLD CRIMP:
6-point w/OS12 overshot
Results: 1355 FPS
9500 PSI
Happy hunting & safe shooting,
-The Curmudgeon
WARNING: Where data contained here, on labels and in catalogs and booklets list
specific components, no changes or substitutions for these
components can be made, except substitutions of shot sizes that
will equate to the same weight charge listed, without risking
significant changes in the level of ballistic performance and/or
safety of the loads shown. Follow loading data exactly and do
not substitute components. We make no warranties express or
implied, limited or full. Failure to comply with these and other
standards of reloading may result in accidents with serious
injury and/or death to the shooter and/or bystanders.
© 2018 Ballistic Products, Inc. All Rights Reserved
© 2020 Ballistic
Products, Inc.
WARNING: BALLISTIC PRODUCTS, INC. DISCLAIMS ALL POSSIBLE LIABILITY FOR DAMAGES, INCLUDING ACTUAL, INCIDENTAL, AND CONSEQUENTIAL, RESULTING FROM USAGE OF INFORMATION OR ADVICE CONTAINED IN THIS AND OTHER PUBLICATIONS, LABELS, CATALOGS, TESTING REPORTS AND BOOKLETS. USE DATA AND ADVICE AT YOUR OWN RISK AND WITH CAUTION. WHERE DATA LIST SPECIFIC COMPONENTS, NO CHANGES OR SUBSTITUTIONS FOR THESE COMPONENTS CAN BE MADE WITHOUT RISKING SIGNIFICANT CHANGES IN THE LEVEL OF BALLISTIC PERFORMANCE AND/OR SAFETY OF THE LOADS SHOWN. FOLLOW LOADING DATA EXACTLY AND DO NOT SUBSTITUTE COMPONENTS. WE MAKE NO WARRANTIES EXPRESS OR IMPLIED, LIMITED OR FULL, AND WE DISCLAIM ANY SUCH WARRANTIES. FAILURE TO COMPLY WITH THESE AND OTHER STANDARDS OF RELOADING MAY RESULT IN ACCIDENTS WITH SERIOUS INJURY AND/OR DEATH TO THE SHOOTER AND/OR BYSTANDERS. KEEP OUT OF REACH OF CHILDREN. WE DISCLAIM ANY AND ALL LIABILITY FOR DAMAGE OR INJURY THAT MAY RESULT FROM YOUR HANDLOADED SHOTSHELLS AS WE HAVE NO CONTROL OVER ANY OF THE NUMEROUS POSSIBLE VARIATIONS IN COMPONENT PRODUCTION LOTS, IN TOOL AND DIE DIMENSIONS, IN YOUR LOADING PRACTICES AND PROCEDURES. THE INDIVIDUAL RELOADER IS SOLELY RESPONSIBLE FOR ANY VARIATION THAT MAY BE INCURRED BY ASSEMBLED AMMUNITION. TO AVOID SERIOUS INJURY OR DEATH TO SHOOTER AND BYSTANDERS, THIS PRODUCT SHOULD ONLY BE USED IN GUNSMITH-INSPECTED GUNS DESIGNED FOR MODERN SHOTSHELLS. IF GUN FAILS TO FIRE, KEEP POINTED IN SAFE DIRECTION FOR 30 SECONDS, THEN UNLOAD CAREFULLY. WEAR EYE AND EAR PROTECTION AND OBSERVE PROPER GUN SAFETY AT ALL TIMES. ALL PRODUCTS SOLD “AS IS”. |
|||||||
![]() |
Your access to
this web site signifies your understanding of, consent to, and agreement
with the terms and restrictions outlined on the
legal
page.